Schaude J, Gröschl AC, Hausotte T (2021)
Publication Type: Journal article
Publication year: 2021
Book Volume: 88
Pages Range: 544-555
Journal Issue: 9
The article presents measurements with a high-speed focal-distance modulated fibre-coupled confocal sensor integrated into a nano measuring machine (NMM-1). Combined with an appropriate signal processing, this axial beam modulating sensor yields a linear characteristic curve within a range of about 600 nm. This characteristic curve enables scans in closed-loop constant distance mode, where the controller of the NMM-1 keeps the distance between the measured surface and the sensor constant. Therefore, only one lateral scan is necessary to measure a given topography. Nevertheless, it is also possible to conduct open-loop constant height measurements on discrete heights. The axial offset between the heights needs to be only slightly less than the measuring range of the sensor, leading to a great reduction of the number of needed lateral scans to measure a given topography compared to a conventional confocal sensor, where the axial offset for a similar optical system is typically about 50 nm. To combine the scans taken at different heights, it is possible to stitch them using overlapping measuring points taken at two adjacent heights. Within this article, measurements are conducted on a roughness standard in closed-loop constant distance and in open-loop constant height mode, where the latter are evaluated with and without the application of the stitching algorithm.
APA:
Schaude, J., Gröschl, A.C., & Hausotte, T. (2021). Stitched open-loop measurements with a focal-distance-modulated confocal sensor. Technisches Messen, 88(9), 544-555. https://doi.org/10.1515/teme-2021-0036
MLA:
Schaude, Janik, Andreas Christian Gröschl, and Tino Hausotte. "Stitched open-loop measurements with a focal-distance-modulated confocal sensor." Technisches Messen 88.9 (2021): 544-555.
BibTeX: Download