Mechanical stability of a novel screw design after repeated insertion: can the double-thread screw serve as a back up?

Wiendieck K, Mueller H, Buchfelder M, Sommer B (2018)


Publication Type: Journal article

Publication year: 2018

Journal

Book Volume: 62

Pages Range: 271-278

Journal Issue: 3

DOI: 10.23736/S0390-5616.16.03337-3

Abstract

BACKGROUND: We investigated mechanical pull-out behavior and tightening torque of a novel dual-core pedicle "6T screw" (6T). The aim of this study was to test if these changes in screw geometry are increasing the strength of the pedicle screw fixation after repeated insertion. METHODS: Three different types of pedicle screws were inserted in rigid foam blocks. Tightening torque and pull-out strength were measured during two repetitive insertions of a standard 6.5×45-mm conical screw. The third insertion into the pilot hole was performed using either standard 6.5×45-mm or 7.2×45-mm conical screws or the novel 6.5×45-mm (6T) screw. Additionally, we performed a surface analysis to investigate the bone/screw interface. RESULTS: The maximal tightening torque at the third insertion of the novel 6T screw was 194% higher compared to the standard 6.5×45-mm conical screw and 135% higher compared to the standard 7.2×45-mm conical screw. The pull-out strength of the 6T screw showed no significant changes, and surface analysis revealed a compression of the screw-foam interface due to the different internal diameters. CONCLUSIONS: The modified geometrical design of the 6T screw seems to have no statistically significant effect on the pull-out strength, although it achieved a higher tightening torque. This might be due to the different pitch angle cutting a new thread into the material and also to the enlarged inner diameter.

Authors with CRIS profile

How to cite

APA:

Wiendieck, K., Mueller, H., Buchfelder, M., & Sommer, B. (2018). Mechanical stability of a novel screw design after repeated insertion: can the double-thread screw serve as a back up? Journal of Neurosurgical Sciences, 62(3), 271-278. https://doi.org/10.23736/S0390-5616.16.03337-3

MLA:

Wiendieck, Kurt, et al. "Mechanical stability of a novel screw design after repeated insertion: can the double-thread screw serve as a back up?" Journal of Neurosurgical Sciences 62.3 (2018): 271-278.

BibTeX: Download