Internally funded project
Start date : 01.01.2009
Production of hollow parts and complex undercuts in high pressure die casting. In high pressure die casting (HPDC) undercuts are only producible by using complex and thus high-maintenance sliders. Until now it is not possible to produce hollow cast parts by means of this technology. Known sand cores from sand- and low pressure die casting with their organic and inorganic binder systems are not suitable for the application in HPDC since they cannot cope with the process specific parameters. The use of lost cores made from salt constitutes a solution. After casting, the core can be removed completely from the part with a pressure water jet making sand-free castings and the integration of complex undercuts possible in HPDC.
Die Darstellung komplexer Geometrien lässt den konventionellen Druckguss schnell an Grenzen stoßen. Die Realisierung geometrisch einfacher Hinterschnitte ist nur durch den Einsatz mechanisch aufwendiger und wartungsintensiver Schiebertechnologien möglich. Aus dem Sand- und Kokillenguss bekannte Sandkerne mit ihren organischen und anorganischen Bindersystemen halten den verfahrensspezifischen Drücken und Geschwindigkeiten nicht Stand und sind deshalb nicht für die Anwendung im Druckguss geeignet. Die Verwendung verlorener Kerne aus Salz stellt hier eine Lösung dar. Nach dem Abgießen werden die Kerne mittels Hochdruckwasserstrahl vollständig aus dem Bauteil entformt und ermöglichen so die sandfreie Darstellung komplex hinterschnittiger Konturen im Leichtmetall-Druckguss.